Showing posts with label Altoids DIY travel kit. Show all posts
Showing posts with label Altoids DIY travel kit. Show all posts

Saturday, April 16, 2011

Tiny Travel Palette DIY with Altoids Mini

For the next week, I will post my array of mini, compact and travel plein air set ups, from the tiniest to the biggest.

Make a mini pocket palette with
  • a tiny Altoids smalls tin,
  • Sculpey Oven Bake Clay
  • Wisp
  • plastic deli lid
  • self stick magnetic strips.

Cover the interior of the box with a thin (about 3mm or 1/4") layer of Sculpey or Fimo. Once you've covered the interior of the box with Sculpey, split it in 6 equal parts using strips of Sculpey. I started by laying a strip lengthwise in the middle of the tin, separating the interior in 2 long compartments. Then, I put four equally-spaced squares of clay to split each half-tray in 3.

Once you're done, you should have 6 compartments of roughly equal size. Use the Wisp to carve and smooth out any sections too small for your fingers. A crochet hook can be used as well. I baked this in the oven at 275 degrees F for 17 minutes. Thinner clay takes a little less time.

After it cooled off, I cut a thick plastic deli lid to fit inside the Altoids lid. I attached it with self-stick magnetic strips. It makes a nice mixing area for my paint and is removable for cleaning or replacement. (You could spray the inside of the lid with white enamel for a similar effect.)


Fill each of the empty sections from tubes of artist's quality watercolor. I used a warm and cool of each of the three primary colors.

Top Row: Permanent Yellow Deep, Vermilion, Manganese Blue

Second Row: Winsor Yellow, Crimson Red Lake, Ultramarine Blue Deep

Tip: Stir freshly squeezed color with a toothpick to make sure it is evenly distributed. Fill each well in two stages, halfway to start. Allow paints to dry with the lid open overnight before topping up and/or transporting.

You can use empty or purchased half pans with self adhesive magnet tape attached on the bottom to hold them in place. However, I prefer the extra width the Sculpey provides so that the adjacent colors don't mix together so easily.
Update: Scroll down my list of broadcasts for a replay of my live demonstration on Periscope.tv/michelecoopart